Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Bulbs on Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Headlight bulb

How to change the bulbs of the Ford Fiesta? Start by removing the bulbs and the front headlamp. Lift the front bonnet of the car, unscrew the securing screws to remove the front headlamp or remove the inspection caps at the back. Once the headlamp or cover is removed, you will find the bulbs with metal clips: pull out the bulb holders from the headlamp and extract the damaged bulbs using a screwdriver. Install the new bulbs (always the correct type and size) and insert the bulb holder into the headlamp housing. Refit the cover or the entire headlamp.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Rear Light Bulb on the Ford Fiesta
How to Change the Rear Light Bulb on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, we will go through the main steps to remove and replace the bulbs of the rear light on the Ford Fiesta. First, open the boot lid and s…
How to Remove and Change the Number Plate Bulbs on a Ford Fiesta
How to Remove and Change the Number Plate Bulbs on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to remove and change the damaged number plate bulbs on a Ford Fiesta. Using a screwdriver or plastic trim tool, remove the number plate light uni…
How to remove the rear light and replace the bulbs of the Ford Fiesta
How to remove the rear light and replace the bulbs of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The instructions in this guide will show us how to disassemble and replace the rear light and its bulbs of the Ford Fiesta. First of all, we open the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos