Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Light Bulb on the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Tail light bulb

In this video, we will go through the main steps to remove and replace the bulbs of the rear light on the Ford Fiesta. First, open the boot lid and start by unscrewing the plastic screw located behind the light, moving the internal trim aside. Then, disconnect the electrical connector of the bulbs, as shown in the video. At this point, remove the light from the outside and separate the bulb holder from the light unit; replace any faulty bulbs with new ones and reassemble everything!

Updated on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Bulb on the Front Headlight of a Ford Fiesta
How to Change the Bulb on the Front Headlight of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To change the damaged bulb on the front headlight of a Ford Fiesta, follow this video carefully. Open the front bonnet and secure it with the prop ro…
How to Change a Bulb on a Ford Fiesta
How to Change a Bulb on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Do you want to change the damaged bulb of a Ford rear light? Follow this video closely to proceed. Open the boot, remove the side fabric trim, unscre…
How to replace the rear headlight bulb of the Ford Fiesta
How to replace the rear headlight bulb of the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) The following video guide will provide us with the tools to independently replace the rear light bulbs of the Ford Fiesta mk8. Let's start the replac…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos