Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Headlight Bulbs on the Ford Fiesta MK6

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Light bulb

See other generations:
Video tutorial

Let's look at the procedure for changing the headlight bulbs on a Ford Fiesta MK6: open the bonnet and locate the bulb holders behind each headlight unit. For the Fiesta MK6, access is often limited, so work carefully.

For the driver's side, remove the air intake hose (if necessary) to gain more space. On the passenger side, move the windscreen washer fluid reservoir.

Grasp the electrical connector, rotate it counterclockwise by about 45 degrees, and gently pull it out towards you. Once the bulb holder is removed, detach the bulb from its socket. Never touch the glass of the new bulb with your fingers, as skin oils reduce its lifespan and can cause breakage.

Reposition any removed components (air intake hose, windscreen washer fluid reservoir). Close the bonnet and test the headlights again.


Posted on 17 June 2026 by ScegliAuto


Related tutorials

How to Change Bulbs on Ford Fiesta
How to Change Bulbs on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) How to change the bulbs of the Ford Fiesta? Start by removing the bulbs and the front headlamp. Lift the front bonnet of the car, unscrew the securin…
Removing Front Headlights on Ford Fiesta
Removing Front Headlights on Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this video tutorial, you will learn how to remove the headlights and replace the bulbs on the Ford Fiesta. First, open the engine bonnet: release …
How to adjust the headlight height of the Ford Fiesta
How to adjust the headlight height of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Below are the steps that will allow you to adjust the height of the front headlights of the Ford Fiesta. Before adjusting the headlights, set the sel…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos