Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on a Ford Fiesta?

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Light bulb

To replace the rear light bulbs on a Ford Fiesta, lift the boot and remove the screws located next to the seal, right next to the light. This will allow you to take the light out of its housing, giving you access to the bulbs. Remove the bulbs by twisting the connector they are attached to: once extracted from their housing, disconnect them from the connector and replace them. The new bulbs can then be inserted into their sockets, and the light can be refitted.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulbs on the Ford Fiesta Mk6
How to Replace the Rear Light Bulbs on the Ford Fiesta Mk6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide shows how to replace the rear light bulbs on the Ford Fiesta Mk6. To perform this operation, you need to remove the light assembly from th…
Replacing the Rear Light Bulbs on a Ford Fiesta
Replacing the Rear Light Bulbs on a Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Today, we will go through the steps to remove and replace the rear light bulbs, including the stop light, reverse light, indicator, and fog light, on…
How to Replace the Rear Light Bulbs on a Ford Fiesta?
How to Replace the Rear Light Bulbs on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the rear light bulbs on a Ford Fiesta, you need to remove the entire light assembly: to do this, open the boot and insert your fingers bet…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos