Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear light and replace the bulbs of the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tail light

See other generations:
Video tutorial

The instructions in this guide will show us how to disassemble and replace the rear light and its bulbs of the Ford Fiesta. First of all, we open the rear hatch of the trunk and start removing the side partition to access the rear part of the light; then we disconnect the electrical connector of the bulbs and unscrew the fixing screws, as shown in the video.

At this point, it will be possible to remove the light and replace the bulbs with new ones if necessary (having the same fitting), applying the reverse process for reassembly!


Posted on 1 February 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on a Ford Fiesta?
How to Replace the Rear Light Bulbs on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) To replace the rear light bulbs on a Ford Fiesta, you need to remove the entire light assembly: to do this, open the boot and insert your fingers bet…
Replacing the Third Brake Light on a Ford Fiesta
Replacing the Third Brake Light on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In today's tutorial, we will see how to replace the brake lights of the third stop on a Ford Fiesta, fifth generation model produced from 2002 to 200…
How to Replace the Brake Light Bulbs on the Ford Fiesta?
How to Replace the Brake Light Bulbs on the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this tutorial, we will see how to replace the brake light bulbs on the Ford Fiesta, a very simple and quick operation. First, ensure the key is no…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos