Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the brake light bulbs in the Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Tail light bulb

In this tutorial we can see how to replace the brake light bulbs in the Ford Fiesta, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the trunk door, locate the two bolts along the inner edge of the tail light in question and unscrew them using a Torx T25 key. Next, move the internal carpet, unscrew the plastic nut indicated and separate the tail light from the body. At this point we can remove the faulty bulb, insert the replacement and reassemble everything following the reverse procedure.

Posted on 15 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Light Bulbs on a Ford Fiesta
Replacing the Rear Light Bulbs on a Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Today, we will go through the steps to remove and replace the rear light bulbs, including the stop light, reverse light, indicator, and fog light, on…
Removing the Third Brake Light on Ford Fiesta
Removing the Third Brake Light on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In today's video, you'll learn how to remove the third brake light on a Ford Fiesta. The removal process is very simple: first, open the boot lid and…
Replacement of the third brake light on a Ford Fiesta
Replacement of the third brake light on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this tutorial today, we will see how to replace the third brake lights of a Ford Fiesta, fifth generation model produced from 2002 to 2005. Let's …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos