Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on the Ford Fiesta Mk6

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Tail light

This guide shows how to replace the rear light bulbs on the Ford Fiesta Mk6. To perform this operation, you need to remove the light assembly from the frame. The first step is to open the boot and remove the two Torx T25 screws. At this point, using a trim removal tool, detach the two fastening clips on the outer side of the light. You can now remove the light assembly from the vehicle by disconnecting the cable located behind the plastic cover, or you can proceed to replace the bulbs by detaching the respective bulb holder.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear light and replace the bulbs of the Ford Fiesta
How to remove the rear light and replace the bulbs of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The instructions in this guide will show us how to disassemble and replace the rear light and its bulbs of the Ford Fiesta. First of all, we open the…
Removing the Rear Light on a 2008 Ford Fiesta
Removing the Rear Light on a 2008 Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's tutorial, you will learn how to remove the rear light to replace the bulbs on a 2008 Ford Fiesta. First, open the boot lid and unscrew the…
How to Change the Rear Light Bulb on the Ford Fiesta
How to Change the Rear Light Bulb on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, we will go through the main steps to remove and replace the bulbs of the rear light on the Ford Fiesta. First, open the boot lid and s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos