Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the position light bulbs in the Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Headlight bulb

In this tutorial we can see how to replace the position lights bulbs in the Ford Fiesta, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the hood and release the upper plastic grille. Next, unscrew the fixing bolts of the headlight in question, separate it from the frame and remove the small cap located on the back of it. At this point, we can remove the bulb from the housing, disconnect the power connector and install the replacement following the reverse procedure.

Posted on 6 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulbs on a Ford Fiesta?
How to Replace the Rear Light Bulbs on a Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To replace the rear light bulbs on a Ford Fiesta, lift the boot and remove the screws located next to the seal, right next to the light. This will al…
How to Replace the Rear Light Bulbs on the Ford Fiesta Mk6
How to Replace the Rear Light Bulbs on the Ford Fiesta Mk6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide shows how to replace the rear light bulbs on the Ford Fiesta Mk6. To perform this operation, you need to remove the light assembly from th…
How to Replace the Headlight Bulbs on a Ford Fiesta MK7
How to Replace the Headlight Bulbs on a Ford Fiesta MK7
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Replacing the bulbs on a Ford Fiesta MK7 is a straightforward task, but it requires the removal of the entire headlight assembly. Open the bonnet, di…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos