Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Headlight bulb

Let's see how to proceed to replace the low beam headlight bulb of the Ford Fiesta. We open the hood of the engine compartment and position ourselves in front of the headlight that contains the bulb to be replaced, unscrew the two screws and the clip that hold it, remove the headlight body and disconnect the electrical connector, remove the rubber cap that protects the bulb, rotate briefly and remove the bulb disconnect the connector and replace it with a new H7 bulb. Insert it into its seat and lock it, connect the connector, close the cap, put the headlight body back in place and lock it with the screws and clip.

Posted on 27 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Gear Knob from a Ford Fiesta
How to Remove the Gear Knob from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before starting, sit in the driver's seat of your Ford Fiesta. Begin by gripping the gear knob with both hands. Next, unscrew it from the gear lever.…
Replacement of the front headlight bulb of the Ford Fiesta
Replacement of the front headlight bulb of the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) If the position light bulb burns out, we must immediately proceed with the replacement for our safety and to avoid fines. To do this, we open the fro…
Replacing the Pollen Filter
Replacing the Pollen Filter
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) The pollen filter on the Ford Fiesta is located low down, on the right side in front of the passenger. To access the work area more easily, it is adv…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos