Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Dipped Headlight on a Ford Fiesta MK6

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight bulb

See other generations:
Video tutorial

In this short video tutorial, learn how to replace a bulb on a Ford Fiesta MK6. Start by opening the bonnet and remove the two screws and the clip that holds the headlamp in position. Now, gently pull the headlamp upwards, being careful of the clips located at the bottom of the headlamp.

Once the headlamp is removed, turn the cap protecting the dipped headlight counterclockwise, disconnect the plug from the old bulb, and fit a new bulb. Finally, reverse the procedure to complete the job.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

Replacing Dipped Beam Bulb Fuse on a Ford Fiesta MK7
Replacing Dipped Beam Bulb Fuse on a Ford Fiesta MK7
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In today’s tutorial video, we will see how to disassemble and replace the fuse for the front dipped beam bulb on a Ford Fiesta MK7, following these s…
Replacement of the low beam headlight bulbs of the Ford Fiesta MKVI.
Replacement of the low beam headlight bulbs of the Ford Fiesta MKVI.
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) To change the low beam headlight bulb of the Ford Fiesta MK VI, we open the hood of the engine compartment. For the headlight on the passenger side, …
How to Change the Headlight Bulb on a 2010 Ford Fiesta
How to Change the Headlight Bulb on a 2010 Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Let's see how to change the front headlight bulb on a 2010 Ford Fiesta (MK6). Open the bonnet and unscrew the two T30 Torx screws above the headlight…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos