Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant Reservoir on a Ford Escort DIY

Model: Ford Escort MK 4 - Years 1990-2000
Part: Radiator

To replace the coolant reservoir on a Ford Escort, work in the engine bay on the driver's side. After lifting the bonnet, locate the white plastic tank connected to the cooling circuit and ensure the engine is cold. Remove the cap and clear the work area around the reservoir. Using the appropriate spanner, unscrew the screws securing it to the cover and wheel arch, then carefully disconnect the rubber hose from the lower fitting, using a screwdriver to slide off the sleeve without damaging it. At this point, you can fully extract the old reservoir from the engine bay and compare it with the new replacement. Transfer the return hose to the new tank and tighten it securely onto the spout. Next, lower the new reservoir into the same position as the old one, aligning the original fixing points: re-screw the screws onto the metalwork and check that the hose is not kinked. Once assembly is complete, replace the cap and restore the coolant level according to the manufacturer's instructions.

Posted on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse diagram for the Ford Escort?
What is the fuse diagram for the Ford Escort?
Ford Escort (1990-2000 / MK 4) In this video, you can find the diagrams of the fuse boxes and their locations in the Ford Escort, useful in case you need to check the status of the…
Where are the fuses of the Ford Escort located?
Where are the fuses of the Ford Escort located?
Ford Escort (1990-2000 / MK 4) The fuses of the Ford Escort are contained inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will be po…
Where is the fuse box of the Ford Escort located?
Where is the fuse box of the Ford Escort located?
Ford Escort (1990-2000 / MK 4) Thanks to the following guide, you will finally be able to independently locate the fuse box inside your Ford Escort. First of all, it is necessary f…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos