Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rocker Cover Gasket

Model: Ford Escort MK 4 - Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Engine

Video tutorial

The failure of the rocker cover gasket (the cover of the camshaft that operates the valves) is a common fault in older cars, leading to oil leaks that can create unpleasant smells when they contact the hot block, which may also enter the cabin; to replace this gasket, remove the cover, thoroughly clean the seating area both under the cover and on the cylinder head, then apply the new cork gasket without adding gasket sealant; finally, tighten the cover fastening bolts in a cross pattern using the torque wrench.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Replacing the Intake Manifold Gasket
Replacing the Intake Manifold Gasket
Ford Escort (1990-2000 / MK 4) Before applying the new gasket to the intake manifold, it is absolutely essential to thoroughly clean the gasket seating area, both on the cylinder h…
Cylinder Head Gasket Replacement
Cylinder Head Gasket Replacement
Ford Escort (1990-2000 / MK 4) After machining the cylinder head, check for any deformations and the perfect flatness of the surface using a straight edge and a feeler gauge; repea…
Exhaust Manifold Gasket Replacement
Exhaust Manifold Gasket Replacement
Ford Escort (1990-2000 / MK 4) Before inserting the new gasket, it is very important to clean its seating, both on the cylinder head side and the manifold side, to remove any dirt …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos