Do it yourself
Frequently asked questions about cars and motorcycles

Exhaust Manifold Gasket Replacement

Model: Ford Escort MK 4 - Years 1990-2000
Part: Engine

Before inserting the new gasket, it is very important to clean its seating, both on the cylinder head side and the manifold side, to remove any dirt and deposits that could compromise the adhesion and sealing of the gasket itself. Once the cleaning is complete, apply the new gasket, aligning it correctly with the dowel pins; then insert the manifold and tighten the securing nuts using a properly calibrated torque wrench. The gasket is made of metallic material due to the high temperature of the exhaust gases.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Escort (1990-2000 / MK 4) Before applying the new gasket to the intake manifold, it is absolutely essential to thoroughly clean the gasket seating area, both on the cylinder h…
Ford Escort (1990-2000 / MK 4) This valve system circulates a portion of exhaust gas from the exhaust manifold to the intake manifold, aiming to lower the combustion temperature of…
Ford Escort (1990-2000 / MK 4) Oil leaks can come from many points on the car. One of these could be the oil sump, and it would be a good idea to replace its gasket every two years…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos