Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Replacement Instructions

Model: Ford Escort MK 4 - Years 1990-2000
Part: Engine oil

Replacing the engine oil is the easiest maintenance task you can perform yourself, provided you dispose of the used oil at an authorised collection centre. Position the vehicle on suitable ramps to facilitate access to the oil sump and drain the oil through the drain plug located just behind the sump; during the engine oil replacement, it is recommended to also change the filter located at the rear right of the engine block: apply some oil to the seal of the new filter before screwing it in; once the new filter is installed and the plug under the sump is tightened, fill the engine with clean oil until the maximum level is reached.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Oil Sump Gasket Replacement Guide
Oil Sump Gasket Replacement Guide
Ford Escort (1990-2000 / MK 4) Oil leaks can come from many points on the car. One of these could be the oil sump, and it would be a good idea to replace its gasket every two years…
Replacement of Camshaft Oil Seal
Replacement of Camshaft Oil Seal
Ford Escort (1990-2000 / MK 4) Before applying the new oil seal, ensure the cleanliness of its housing and the absence of any dents that may have been caused during its removal, as…
Replacing the Crankshaft Oil Seal
Replacing the Crankshaft Oil Seal
Ford Escort (1990-2000 / MK 4) Once you have removed the auxiliary and timing belts, remove the crankshaft pulley, extract the old oil seal, clean the sealing area thoroughly, and …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos