Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Crankshaft Oil Seal

Model: Ford Escort MK 4 - Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Engine

Video tutorial

Once you have removed the auxiliary and timing belts, remove the crankshaft pulley, extract the old oil seal, clean the sealing area thoroughly, and insert the new one, lubricating it generously. After inserting the new oil seal, align the timing marks and proceed with the installation of the new timing belt and the crankshaft pulley (align the keyway and tighten the fixing bolt using a torque wrench).

The failure of the crankshaft oil seal is not a common defect, but it can still cause damaging oil leaks.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Replacement of Camshaft Oil Seal
Replacement of Camshaft Oil Seal
Ford Escort (1990-2000 / MK 4) Before applying the new oil seal, ensure the cleanliness of its housing and the absence of any dents that may have been caused during its removal, as…
Engine Oil Replacement Instructions
Engine Oil Replacement Instructions
Ford Escort (1990-2000 / MK 4) Replacing the engine oil is the easiest maintenance task you can perform yourself, provided you dispose of the used oil at an authorised collection c…
Oil Sump Gasket Replacement Guide
Oil Sump Gasket Replacement Guide
Ford Escort (1990-2000 / MK 4) Oil leaks can come from many points on the car. One of these could be the oil sump, and it would be a good idea to replace its gasket every two years…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos