Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Camshaft Oil Seal

Model: Ford Escort MK 4 - Years 1990-2000
Part: Engine

Before applying the new oil seal, ensure the cleanliness of its housing and the absence of any dents that may have been caused during its removal, as these could compromise its adherence and sealing. Lubricate both the new oil seal and its housing with clean oil, insert the oil seal with the sealing lip facing inwards, and press it in until it is fully seated using the appropriate tool. Then proceed to install the timing belt pulley, first placing the key on the shaft and then fitting the pulley itself, tightening the securing bolt with a torque wrench.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Installing the Camshaft
Instructions for Installing the Camshaft
Ford Escort (1990-2000 / MK 4) To install the new camshaft and the valve control rocker assembly, proceed with great care and precision as any inaccuracy will affect the engine's o…
Replacing the Crankshaft Oil Seal
Replacing the Crankshaft Oil Seal
Ford Escort (1990-2000 / MK 4) Once you have removed the auxiliary and timing belts, remove the crankshaft pulley, extract the old oil seal, clean the sealing area thoroughly, and …
Replacement of the Wheel Side Driveshaft Boot
Ford Escort (1990-2000 / MK 4) Replacing the driveshaft boot requires removing the CV joint from the driveshaft itself. There are patented boots available that can be installed wit…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos