Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Installing the Camshaft

Model: Ford Escort MK 4 - Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Engine

Video tutorial

To install the new camshaft and the valve control rocker assembly, proceed with great care and precision as any inaccuracy will affect the engine's operation; lubricate the new camshaft and its seating for insertion, apply the oil seal with the lip facing inwards, and install the locking key for the timing belt pulley, which will be tightened with the torque wrench; then insert the plug at the other end, the pins of the rocker assembly, and the respective control rods to complete the installation.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Replacement of Camshaft Oil Seal
Replacement of Camshaft Oil Seal
Ford Escort (1990-2000 / MK 4) Before applying the new oil seal, ensure the cleanliness of its housing and the absence of any dents that may have been caused during its removal, as…
Replacing the Crankshaft Oil Seal
Replacing the Crankshaft Oil Seal
Ford Escort (1990-2000 / MK 4) Once you have removed the auxiliary and timing belts, remove the crankshaft pulley, extract the old oil seal, clean the sealing area thoroughly, and …
Replacement of the Wheel Side Driveshaft Boot
Ford Escort (1990-2000 / MK 4) Replacing the driveshaft boot requires removing the CV joint from the driveshaft itself. There are patented boots available that can be installed wit…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos