Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Timing Belt Replacement

Model: Ford Escort MK 4 - Years 1990-2000
Part: Timing belt

Replacing the timing belt is a delicate operation, as an error in aligning the timing marks could severely damage the engine. With that said, to work comfortably, first loosen the tensioner (which will need to be removed) of the auxiliary belt and remove it. Then remove the right front wheel and the wheel arch liner to access the pulleys and remove the crankshaft pulley. Remove the plastic covers of the timing belt, align the timing marks, and proceed with the removal by loosening the relevant tensioner. In addition to the belt, it is advisable to replace the water pump and the tensioner: drain the fluid and replace the pump, then install the new timing belt and also the auxiliary belt.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Crankshaft Oil Seal
Replacing the Crankshaft Oil Seal
Ford Escort (1990-2000 / MK 4) Once you have removed the auxiliary and timing belts, remove the crankshaft pulley, extract the old oil seal, clean the sealing area thoroughly, and …
Replacement of Camshaft Oil Seal
Replacement of Camshaft Oil Seal
Ford Escort (1990-2000 / MK 4) Before applying the new oil seal, ensure the cleanliness of its housing and the absence of any dents that may have been caused during its removal, as…
Replacement of Various Cylinder Head Components
Replacement of Various Cylinder Head Components
Ford Escort (1990-2000 / MK 4) In this video tutorial, various components are mounted on the cylinder head of a Ford Escort engine. In the first section of the video, after verifyi…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos