Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump on a Ford Cougar

Model: Ford Cougar MK 1 - Years 1998-2002
Part: Pump

You can replace the water pump on the Ford Cougar by lifting the car so that the front right wheel does not touch the ground: once the wheel is lifted, remove the screws that secure it to the hub. By also removing the inner lining of the wheel arch, you will be able to locate the water pump on the side of the engine: disconnect it from the respective hoses and securing screws, as well as from the timing belt. You can now insert the new water pump, securing and connecting it appropriately.

Posted on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Antenna Mount on a Ford Cougar
How to Replace the Antenna Mount on a Ford Cougar
Ford Cougar (1998-2002 / MK 1) To replace the antenna mount on a Ford Cougar, access the interior of the vehicle to disconnect the courtesy light housing. Once this has been remove…
A 1999 Ford Cougar Where the Engine Turns but Won't Start
A 1999 Ford Cougar Where the Engine Turns but Won't Start
Ford Cougar (1998-2002 / MK 1) In this video, you will see a Ford Cougar where the starter motor turns, but the engine does not start. The diagnostic procedure followed was to list…
How to Fit Wheel Spacers on a Ford Cougar?
How to Fit Wheel Spacers on a Ford Cougar?
Ford Cougar (1998-2002 / MK 1) Here you will find information on how to fit wheel spacers on your Ford Cougar. The steps are very simple and are as follows. First, slightly loosen …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos