Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the power steering pump of the Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Pump

See other generations:
Video tutorial

The main institutions mentioned in this guide will explain the procedure for disassembling and replacing the hydraulic power steering pump of the Ford Focus. First, we open the hood of the car and start by disconnecting the serpentine belt, then disconnect it from the power steering pulley; then we lift the car to unscrew the pump bolts, disconnecting the hydraulic lines to remove it, as shown in the video.

At this point, we proceed with the replacement of the hydraulic power steering pump, securing it properly; we reconnect the serpentine belt and top up with power steering fluid.


Posted on 27 October 2025 by ScegliAuto


Related tutorials

How to Replace the Power Steering Pump on a Ford Focus 2.0L
How to Replace the Power Steering Pump on a Ford Focus 2.0L
Ford Focus (2004-2011 / MK 2, Focus 2) Today's main steps will show you the procedure for removing and replacing the hydraulic power steering pump on a Ford Focus 2.0L. First, open the bon…
Common Causes of Power Steering Failures in the Ford Focus
Common Causes of Power Steering Failures in the Ford Focus
Ford Focus (2011-2018 / MK 3) This video explores the causes of power steering failure in the Ford Focus and Ford C-Max. Internal malfunction of the steering unit will prevent pow…
How to Replace the Power Steering Fluid on a Ford Focus MK2
How to Replace the Power Steering Fluid on a Ford Focus MK2
Ford Focus (2004-2011 / MK 2, Focus 2) In today's tutorial video, you will see instructions on how to replace the power steering fluid on the second series Ford Focus in simple steps. Firs…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos