Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Power Steering Fluid on a Ford Focus MK2

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Power steering fluid

In today's tutorial video, you will see instructions on how to replace the power steering fluid on the second series Ford Focus in simple steps. First, open the bonnet of your car and locate the power steering fluid reservoir; then remove the cap and siphon out the old fluid inside, possibly using a pump. At this point, pour in the new power steering fluid of the correct type; fill it up to the maximum level indicated by a mark on the side of the reservoir!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Tensioner Pulley on the Ford Focus MK1
Replacing the Tensioner Pulley on the Ford Focus MK1
Ford Focus (1998-2004 / MK 1) In today's video, follow the main steps to remove and replace the tensioner pulley of the drive belt on the first series Ford Focus. First, open the …
How to replace the power steering pump of the Ford Focus
How to replace the power steering pump of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) The main institutions mentioned in this guide will explain the procedure for disassembling and replacing the hydraulic power steering pump of the For…
Replacing the Windscreen Washer Pump on a Ford Focus
Replacing the Windscreen Washer Pump on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Below are the steps that will allow you to disassemble and replace the windscreen washer pump on a Ford Focus. First, lift the vehicle to remove the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos