Do it yourself
| ||||
|
Ford Focus - Video tutorial
Model: Ford Focus
MK 2, Focus 2
- Years 2004-2011 Today's main steps will show us the procedure for disassembling and replacing the hydraulic power steering pump of the Ford Focus 2.0L. First, we open the hood and begin to disconnect the service belt connected to the power steering pump pulley; then we unscrew the central screw and the screws of the power steering pump, after removing the connection of the power steering oil reservoir, as shown in the video. Once the hydraulic power steering pump is removed, we can replace it with the new original one, finally pouring in the new oil!
Posted on 3 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |