Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna Mount on a Ford Cougar

Model: Ford Cougar MK 1 - Years: 1998, 1999, 2000, 2001, 2002
Part: Antenna

Video tutorial

To replace the antenna mount on a Ford Cougar, access the interior of the vehicle to disconnect the courtesy light housing. Once this has been removed and the connectors disconnected, you can unscrew the screw underneath that secures the antenna mount from the inside.

After removing the screw, you can then remove the antenna mount from the outside and replace it with a new spare part. This should be secured with the screw from inside the cabin, reattaching the light housing.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Replace the Water Pump on a Ford Cougar
How to Replace the Water Pump on a Ford Cougar
Ford Cougar (1998-2002 / MK 1) You can replace the water pump on the Ford Cougar by lifting the car so that the front right wheel does not touch the ground: once the wheel is lifte…
How to Fit Wheel Spacers on a Ford Cougar?
How to Fit Wheel Spacers on a Ford Cougar?
Ford Cougar (1998-2002 / MK 1) Here you will find information on how to fit wheel spacers on your Ford Cougar. The steps are very simple and are as follows. First, slightly loosen …
A 1999 Ford Cougar Where the Engine Turns but Won't Start
A 1999 Ford Cougar Where the Engine Turns but Won't Start
Ford Cougar (1998-2002 / MK 1) In this video, you will see a Ford Cougar where the starter motor turns, but the engine does not start. The diagnostic procedure followed was to list…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos