How do you remove the evaporative valve in a 2014 Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Valve

Ok, let's get comfortable: to remove the evaporative valve (EVAP) on your 2014 Ford Fiesta, you will need some patience and a few basic tools. First things first: disconnect the battery, it's always better to work safely. The EVAP valve is usually located near the engine, attached to the intake manifold or near the engine compartment, depending on the model. Once located, disconnect the electrical connector and the connected tubes, be careful, they can be a bit stubborn. Then unscrew the mounting screws with a ratchet wrench. Once free, carefully remove the valve. If you are replacing it, install the new one following the same steps in reverse. Voilà, job done. If you don't feel comfortable doing it yourself, contact a professional workshop.

Posted on 13 October 2025 by ScegliAuto

This video is currently unavailable

Other guides you may be interested in

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Valve - Maintenance and repair on other vehicles

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!

by ScegliAuto

How do you remove the evaporative valve in a 2014 Ford Fiesta?

Related tutorials

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

More videos