Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Indicator Stalk from a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Valve

See other generations:
Video tutorial

Have you encountered problems with the indicator stalk on your Ford Fiesta? Watch this video to learn how to proceed with the disassembly. First, disconnect the battery cables located in the engine bay, then unscrew the screws located on the sides of the steering wheel.

Remove the airbag from the steering wheel along with the relevant power connectors. Once the airbag is removed, unscrew the large central pin that secures the steering wheel and pull the steering wheel towards you. Carefully detach the round piece located above the indicator stalk without damaging it. Prepare to install the new piece by reversing the steps.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Reset the BMS Light on a 2016 Ford Fiesta
How to Reset the BMS Light on a 2016 Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this video tutorial, you will see how to reset the BMS light (Battery Management System) on a 2016 Ford Fiesta by following some simple steps: fir…
How to Remove the Door Lock of a Ford Fiesta
How to Remove the Door Lock of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Before starting, open the door of your Ford Fiesta. First, unclip and remove the side cover of the screw that secures the handle and the lock to the …
How to Remove the Gear Knob from a Ford Fiesta
How to Remove the Gear Knob from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Before starting, sit in the driver's seat of your Ford Fiesta. Begin by gripping the gear knob with both hands. Next, unscrew it from the gear lever.…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos