Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the EGR Valve on a Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: EGR valve

Let's see how to remove the EGR valve on a Ford Fiesta. Lift the bonnet and secure it, then, using a screwdriver, unscrew the locking pins of the ventilation pipe and remove the part from the engine bay. Start by removing the fastening pins of the EGR valve (as shown in the video). Once the part is detached from its seat, unscrew the screws on it with a screwdriver. Clean the valve using a suitable product for cleaning mechanical parts: use a brush to assist with the task. Once the part is renewed, assemble the pieces together. Finally, refit the EGR valve in the engine bay.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the EGR valve located on the Ford Fiesta?
Where is the EGR valve located on the Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video, you can see where the EGR valve is located on the Ford Fiesta and how to proceed if you need to replace it, a very simple operation. A…
How to Remove the EGR Valve from the Ford Fiesta 1.4 TDCi
How to Remove the EGR Valve from the Ford Fiesta 1.4 TDCi
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the EGR valve on this vehicle in a DIY manner, refer to the useful instructions in this description and the tutorial video. Open the bonne…
Replacing the Thermostat on a Ford Fiesta
Replacing the Thermostat on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Replacing the thermostat on a Ford Fiesta? Let's see how to remove it from the engine bay. Open the front bonnet, locate the part to be removed. To r…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos