Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the cylinder head of the Ford Fiesta 1.6 TDCi

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Cylinder head

Below we will see the main instructions that will allow us to disassemble and replace the cylinder head of the Ford Fiesta 1.6 TDCi engine block. First, we open the hood of the car and start disassembling the upper hoses and the turbocharger, unscrewing all the fixing screws; then we remove the cylinder head cover, as shown in the video. At this point, we unscrew the cylinder head bolts to remove it, replacing its gasket if necessary; we perfectly reassemble the cylinder head and check the integrity of all other components, following the video tutorial until the end!

Posted on 10 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Injectors and Copper Washers from the Ford Fiesta 1.4 TDCi
Removing the Injectors and Copper Washers from the Ford Fiesta 1.4 TDCi
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In today's video tutorial, see the main steps to remove the diesel injectors and their copper washers (which often cause leaks) from the Ford Fiesta …
How to Remove the Glow Plugs from a Ford Fiesta 1.4
How to Remove the Glow Plugs from a Ford Fiesta 1.4
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Want to remove the glow plugs from your Fiesta but don't know how? This detailed guide will show you how to proceed with the disassembly. Pull the en…
How to Remove the Injectors from the Ford Fiesta 1.4 TDCi
How to Remove the Injectors from the Ford Fiesta 1.4 TDCi
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) This guide provides the main instructions for removing and replacing the fuel injectors of the Ford Fiesta 1.4 TDCi. First, open the bonnet of your c…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos