Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Cylinder Head of the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Cylinder head

See other generations:
Video tutorial

Today, we will discover the instructions that will allow you to remove the cylinder head and replace its gasket on the Ford Fiesta with a petrol engine. First, open the bonnet of the vehicle and start by removing the air filter box, unscrewing the fixing screws and disconnecting the intake hose; then lift the vehicle and disconnect the radiator hose, draining the coolant into a container, as shown in the video.

At this point, remove the valve cover and the timing belt, then proceed to remove the cylinder head, following the video tutorial to the end!


Updated on 29 September 2026 by ScegliAuto


Related tutorials

How and when to replace the timing belt of the Ford Fiesta 1.0 Ecoboost
How and when to replace the timing belt of the Ford Fiesta 1.0 Ecoboost
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this guide, we will see the instructions for disassembling and replacing the timing belt of the Ford Fiesta 1.0 Ecoboost; on this type of engine, …
Guide to Replacing the Timing Belt on the Ford Fiesta 1.0 Ecoboost
Guide to Replacing the Timing Belt on the Ford Fiesta 1.0 Ecoboost
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) The main steps today will show you how to dismantle and replace the timing belt on the Ford Fiesta 1.0 Ecoboost. To access the timing belt, it is adv…
Disassembly of the cylinder head of the Ford Fiesta 1.6 TDCi
Disassembly of the cylinder head of the Ford Fiesta 1.6 TDCi
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Below we will see the main instructions that will allow us to disassemble and replace the cylinder head of the Ford Fiesta 1.6 TDCi engine block. Fir…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos