Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on the Ford Fiesta 1.0 Ecoboost

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Timing belt

See other generations:
Video tutorial

The main steps today will show you how to dismantle and replace the timing belt on the Ford Fiesta 1.0 Ecoboost. To access the timing belt, it is advisable to remove the entire engine block, just like in this case; first, remove the cylinder head cover and disconnect the auxiliary belt, then remove the crankshaft pulley, as shown in the video.

At this point, take the necessary references for replacing the timing belt, then install the new one, finally reassembling the components and the entire engine block.


Updated on 25 September 2026 by ScegliAuto


Related tutorials

How and when to replace the timing belt of the Ford Fiesta 1.0 Ecoboost
How and when to replace the timing belt of the Ford Fiesta 1.0 Ecoboost
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this guide, we will see the instructions for disassembling and replacing the timing belt of the Ford Fiesta 1.0 Ecoboost; on this type of engine, …
How to replace the timing belt of the Ford Fiesta 1.0 Ecoboost.
How to replace the timing belt of the Ford Fiesta 1.0 Ecoboost.
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Below, we will discover the instructions that will guide us through the disassembly and replacement procedure for the timing belt of the Ford Fiesta …
Guide to replacing the timing belt on the Ford Fiesta 1.0 Ecoboost
Guide to replacing the timing belt on the Ford Fiesta 1.0 Ecoboost
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) The main instructions in this guide will illustrate the procedure for replacing the timing belt on the Ford Fiesta 1.0 Ecoboost. First, open the bonn…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos