Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt of the Ford Fiesta 1.0 Ecoboost.

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Timing belt

Below, we will discover the instructions that will guide us through the disassembly and replacement procedure for the timing belt of the Ford Fiesta 1.0 Ecoboost. First, let's open the vehicle's hood and begin to disassemble and remove the engine mount on the timing belt side, moving aside the various wiring; we will lift the vehicle and remove the front right wheel, then proceed to remove the crankshaft pulley and the timing cover. At this point, we will proceed with the removal and replacement of the timing belt, following the video tutorial until the end!

Posted on 4 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How and when to replace the timing belt of the Ford Fiesta 1.0 Ecoboost
How and when to replace the timing belt of the Ford Fiesta 1.0 Ecoboost
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this guide, we will see the instructions for disassembling and replacing the timing belt of the Ford Fiesta 1.0 Ecoboost; on this type of engine, …
How to Replace the Timing Belt on the Ford Fiesta 1.0 EcoBoost
How to Replace the Timing Belt on the Ford Fiesta 1.0 EcoBoost
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the timing belt on the Ford Fiesta 1.0 EcoBoost, open the bonnet to access the components inside the engine bay. On the left side, near th…
Guide to replacing the timing belt of the Ford Fiesta 1.0 Ecoboost
Guide to replacing the timing belt of the Ford Fiesta 1.0 Ecoboost
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today's main steps will show us the disassembly and replacement of the timing belt of the Ford Fiesta 1.0 Ecoboost. To access the timing belt, it is …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos