Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : Engine mount replacement on Fiesta

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK V, Fiesta 5, MK 5 - Years 2002-2008
Part: Engine mount
Operation: Engine mount replacement on Fiesta

Replacing the engine mount of a Ford Fiesta? Let's see how the engine compartment is removed from inside. We pull the lever of the engine compartment opening and raise the front hood, let's put it in safety. We identify the metal piece on the left of the engine that we need to disassemble (under the trays). We unscrew the locking pins on the sides of the coolant tanks with the socket wrench (remove the tanks). We raise the engine a little with a jack. Unscrew the fastening screws of the motor support and extract it from inside the compartment. We replace the damaged motor mount with a new one, tighten the pins around the mount. We mount the coolant tanks and finally lower the engine.


Posted on 19 December 2023 by ScegliAuto



How do you replace the timing belt of the Ford Fiesta 1.0 EcoBoost?
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) The replacement of the timing belt on the Ford Fiesta 1.0 EcoBoost is done by opening the hood, so that you have access to the components located ins
Remove the engine mount on Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Removing a damaged engine mount on a Ford Focus? Let's see the disassembly of the damaged piece. Let's lift the front hood, let's put it in safety. W
How to replace the lambda probe on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) Let's see how to replace the lambda probe on a Ford Fiesta. We raise the front hood of our car, stop with a special rod. Remove the plastic engine co

Other guides that may interest you

    Frequently Asked Questions

    • Fiesta 2008-2017 - How much does it cost to replace the engine mount in Ford Fiesta? Read Answer
    • Fiesta 2008-2017 - How much does the Fiesta 1.4 TDCi engine mount cost? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos