Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How and when to replace the timing belt of the Ford Fiesta 1.0 Ecoboost

Model: Ford Fiesta Fiesta 7, MK VII, MK 7 - Years 2017-2023
Part: Timing belt

In this guide, we will see the instructions for disassembling and replacing the timing belt of the Ford Fiesta 1.0 Ecoboost; on this type of engine, the timing belt should be replaced after ten years or 240,000 kilometers. To carry out the disassembly, it will be necessary to remove the cylinder head cover and the engine support, then lift the vehicle to remove the belt and the crankshaft pulley. We replace the timing belt with a new original one, in order to ensure proper functioning and durability over the years.

Posted on 19 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the timing belt of the Ford Fiesta 1.0 EcoBoost?
How do you replace the timing belt of the Ford Fiesta 1.0 EcoBoost?
Ford Fiesta (2008-2017 / MK 6, MK VI, Fiesta 6) In order to replace the timing belt of the Ford Fiesta 1.0 EcoBoost, you need to open the hood so that you have access to the components located insi…
How do you replace the timing belt of the Ford Fiesta 1.0 EcoBoost?
How do you replace the timing belt of the Ford Fiesta 1.0 EcoBoost?
Ford Fiesta (2008-2017 / MK 6, MK VI, Fiesta 6) The replacement of the timing belt on the Ford Fiesta 1.0 EcoBoost is done by opening the hood, so that you have access to the components located ins…
How to replace the timing belt of the Ford Fiesta 1.0 Ecoboost.
How to replace the timing belt of the Ford Fiesta 1.0 Ecoboost.
Ford Fiesta (2008-2017 / MK 6, MK VI, Fiesta 6) Below, we will discover the instructions that will guide us through the disassembly and replacement procedure for the timing belt of the Ford Fiesta …

Other guides you may be interested in

Replace the Steering Angle Sensor on a Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may be necessary to replace it as follows: first, remove the steering wheel and the lower steering column cover by unscrewing the three fixing screws. The steering sensor is located just below the steering column. To detach it, use a small screwdriver and insert it into the hole at the front, pushing it all the way in until you unlock the clip at the bottom. Next, pull down the rear part of the board containing the sensor and detach it from the steering column. At this point, take the new board and reposition it, then reverse the process to reassemble the various components.

Watch the video!


by ScegliAuto

More videos