Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Intake Manifold Gasket

Model: Ford Escort MK 4 - Years 1990-2000
Part: Engine

Before applying the new gasket to the intake manifold, it is absolutely essential to thoroughly clean the gasket seating area, both on the cylinder head side and the manifold side: all dirt and deposits that could compromise the adhesion and thus the sealing of the gasket must be removed; after cleaning, place the new gasket in its seat aligning it with the dowel pins, then position the intake manifold and tighten the respective mounting nuts in a cross pattern using a torque wrench.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Escort (1990-2000 / MK 4) Before inserting the new gasket, it is very important to clean its seating, both on the cylinder head side and the manifold side, to remove any dirt …
Ford Escort (1990-2000 / MK 4) This valve system circulates a portion of exhaust gas from the exhaust manifold to the intake manifold, aiming to lower the combustion temperature of…
Ford Escort (1990-2000 / MK 4) The failure of the rocker cover gasket (the cover of the camshaft that operates the valves) is a common fault in older cars, leading to oil leaks tha…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos