Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Factory Radio from a Ford Escape 2

Model: Ford Escape MK 2 - Years: 2008, 2009, 2010, 2011, 2012
Part: Car stereo

See other generations:
Video tutorial

In this video tutorial, you will see how to remove the factory radio from the second generation Ford Escape by following these simple and quick steps. First, get in the vehicle and start by removing the center air vents by prying them from the sides.

Then, unscrew the screws located underneath to remove the entire center console, as shown in the video. At this point, disconnect the electrical connectors at the back to completely remove the factory radio.

Finally, reassemble everything by applying the reverse procedure!


Updated on 6 June 2026 by ScegliAuto


Related tutorials

Removing the Original Radio from the Ford Escape MK1
Removing the Original Radio from the Ford Escape MK1
Ford Escape (2001-2007 / MK 1) Today, learn how to remove and replace the original factory radio of the first-generation Ford Escape in simple and quick steps. First, get inside th…
How to Remove the Factory Radio from the Ford Escape
How to Remove the Factory Radio from the Ford Escape
Ford Escape (2013-2019 / MK 3) Briefly, you will see the steps to remove and replace the factory radio from the Ford Escape, following the instructions below. First, get inside the…
How to remove the factory radio of the Ford Escape 2
How to remove the factory radio of the Ford Escape 2
Ford Escape (2008-2012 / MK 2) If you want to disassemble the factory radio inside the cabin of your second-generation Ford Escape on your own, just follow the steps described belo…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos