Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Original Radio from the Ford Escape MK1

Model: Ford Escape MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Car stereo

See other generations:
Video tutorial

Today, learn how to remove and replace the original factory radio of the first-generation Ford Escape in simple and quick steps. First, get inside the vehicle and insert the appropriate radio extraction tools (you can try using four small screwdrivers) into the holes of the radio; then, pull out the original stereo as shown in the video.

At this point, disconnect the electrical connectors found on the back to remove it completely; all that’s left is to replace it with the new one and reassemble everything by following the reverse procedure!


Updated on 30 May 2026 by ScegliAuto


Related tutorials

Replacing the Front Door Lock Actuator on the Ford Escape
Replacing the Front Door Lock Actuator on the Ford Escape
Ford Escape (2001-2007 / MK 1) The instructions in this guide will show you the procedure for removing and replacing the lock actuator on the Ford Escape. First, open the front doo…
Removing the Throttle Body on a Ford Escape V8 (2009-2016)
Removing the Throttle Body on a Ford Escape V8 (2009-2016)
Ford Escape (2008-2012 / MK 2) In this video, we will see how to remove and replace the throttle body on the Ford Escape with a V8 engine from 2009 to 2016. First, open the hood an…
Where is the Fuse Box Located in the 2006 Ford Escape?
Where is the Fuse Box Located in the 2006 Ford Escape?
Ford Escape (2001-2007 / MK 1) In this guide, we will discover where the fuse box is located in your first-generation 2006 Ford Escape. First, ensure the vehicle is completely off …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos