Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Door Lock Actuator on the Ford Escape

Model: Ford Escape MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Door lock

See other generations:
Video tutorial

The instructions in this guide will show you the procedure for removing and replacing the lock actuator on the Ford Escape. First, open the front door of the vehicle and start removing the inner panel by unscrewing the fastening screws; also remove the window switch and disconnect the electrical connector located underneath, as shown in the video.

At this point, remove the outer handle and take out the lock module by unscrewing the internal screws and disconnecting the electrical wiring; replace the lock with the new one and reassemble all the door components.


Posted on 5 May 2026 by ScegliAuto


Related tutorials

How to Replace the Lock in the Ford Escape?
How to Replace the Lock in the Ford Escape?
Ford Escape (2013-2019 / MK 3) In this tutorial, see how to replace the lock in the Ford Escape, a very simple and quick operation. First, open the door in question, then using a f…
How to Remove the Front Door of the Ford Escape
How to Remove the Front Door of the Ford Escape
Ford Escape (2001-2007 / MK 1) This brief guide explains how to remove and replace the front door of the first-generation Ford Escape. First, open the front door and start by detac…
How to remove the front door panel of the Ford Escape
How to remove the front door panel of the Ford Escape
Ford Escape (2001-2007 / MK 1) In this short guide, we will see the process of disassembling the door panel of the Ford Escape, in simple and quick steps. First, we open the front …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos