Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the exterior door handle of the Ford Escape

Model: Ford Escape MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Handle

See other generations:
Video tutorial

Today's information will allow us to dismantle and replace the external handle of the front door of the Ford Escape, in simple and quick steps. First, we open the front door of the car and start unscrewing the side screw found inside the hole, corresponding to the handle; we then remove the rectangular piece and then remove the entire handle, as shown in the video.

At this point, we install the new external door handle, fixing it correctly with the side screw; we check the correct operation, replacing the other handle if necessary.


Posted on 24 August 2025 by ScegliAuto


Related tutorials

How to Remove the Exterior Door Handle of the Ford Escape MK1
How to Remove the Exterior Door Handle of the Ford Escape MK1
Ford Escape (2001-2007 / MK 1) In today's video, you will see the procedure necessary to remove and replace the exterior door handle of the first generation Ford Escape. First, ope…
How to replace the headlight bulb of the Ford Escape
How to replace the headlight bulb of the Ford Escape
Ford Escape (2013-2019 / MK 3) The following steps will show us how to disassemble and replace the low beam or high beam bulb of the front headlight of the Ford Escape. First, we o…
How to Fold Down the Rear Seats in a Ford Escape?
How to Fold Down the Rear Seats in a Ford Escape?
Ford Escape (2013-2019 / MK 3) In this short tutorial, you will see how to fold down the rear seats in a Ford Escape, a very simple operation to perform when you need more space in…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos