Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Light and Third Brake Light on the Ford Escape

Model: Ford Escape MK 2 - Years 2008-2012
Part:

In this guide, we will go over the instructions that will allow us to remove and replace the tail light and its bulbs for the Ford Escape. First, let's move to the rear of the vehicle and start unscrewing the two mounting screws found on the third brake light; pry on the sides to detach and remove it, as shown in the video. At this point, disconnect the electrical connector for the bulbs located at the back, then replace the light or the bulbs for the brake light (separating the socket from the lens); finally, reassemble the third brake light!

Updated on 30 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the third brake light on a Ford Escape
How to disassemble the third brake light on a Ford Escape
Ford Escape (2013-2019 / MK 3) Today we will see how to disassemble the third brake light of a third generation Ford Escape. So, to remove the third brake light we need to release …
How to Replace the Third Brake Light Bulb on the Ford Escape - Kuga
How to Replace the Third Brake Light Bulb on the Ford Escape - Kuga
Ford Escape (2013-2019 / MK 3) Follow these steps to remove and replace the third brake light bulb on the Ford Escape, as well as the Kuga. First, go to the back of the vehicle and…
How to Replace the Tail Light and Third Brake Light on the Ford Escape
How to Replace the Tail Light and Third Brake Light on the Ford Escape
Ford Escape (2013-2019 / MK 3) In this brief guide, you will find instructions to remove and replace the tail light and third brake light on the Ford Escape, as well as the Kuga. F…

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos