Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear light and replace the stop lights of the Ford Kuga.

Model: Ford Escape MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the rear light and its bulbs of the Ford Escape, but also of the Kuga. First, we open the rear trunk door and start removing the plastic side panel, unscrewing the screw of the rear light and the electrical connector; we then replace any faulty bulbs with new ones, having the same connection, as shown in the video.

If necessary, we replace the entire rear light, fixing it correctly and making the connection, checking the operation of all the stop lights.


Posted on 29 July 2025 by ScegliAuto


Related tutorials

How to Replace the Tail Light and Third Brake Light on the Ford Escape
How to Replace the Tail Light and Third Brake Light on the Ford Escape
Ford Escape (2013-2019 / MK 3) In this brief guide, you will find instructions to remove and replace the tail light and third brake light on the Ford Escape, as well as the Kuga. F…
How to Replace the Third Brake Light Bulb on the Ford Escape - Kuga
How to Replace the Third Brake Light Bulb on the Ford Escape - Kuga
Ford Escape (2013-2019 / MK 3) Follow these steps to remove and replace the third brake light bulb on the Ford Escape, as well as the Kuga. First, go to the back of the vehicle and…
How to Replace the Brake Light Bulb on a Ford Escape
How to Replace the Brake Light Bulb on a Ford Escape
Ford Escape (2013-2019 / MK 3) The taillights on your vehicle are very important as they ensure greater safety while driving. For this reason, it is essential to replace the bulbs …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos