Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Bulb on a Ford Escape

Model: Ford Escape MK 3 - Years 2013-2019
Part: Tail light bulb

The taillights on your vehicle are very important as they ensure greater safety while driving. For this reason, it is essential to replace the bulbs if they fail. In this mini guide, discover how to change the brake light bulb on the Ford Escape Mk3. First, fully lift the hood and remove the plastic cover (located near the light) using a flathead screwdriver. Next, using an 8mm wrench, remove the two screws and take out the light assembly. At this point, disconnect the connector and replace the faulty bulb with a new one. Finally, reconnect the connector and reposition all components correctly.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Ford Escape 4
How to replace the rear headlight bulb of the Ford Escape 4
Ford Escape (2020-2026 / MK 4) If you own a Ford Escape Mk4 and want to replace the rear headlight bulb yourself, all you need to do is carefully read the following procedure and f…
How to Replace the Rear Light Bulb in the Ford Escape
How to Replace the Rear Light Bulb in the Ford Escape
Ford Escape (2013-2019 / MK 3) To replace the rear light bulb in the Ford Escape, open the trunk lid to access the screws on the side of the light. By removing the cover caps and l…
How to replace the rear headlight bulb on a Ford Escape
How to replace the rear headlight bulb on a Ford Escape
Ford Escape (2008-2012 / MK 2) To replace the rear headlight bulb on a Ford Escape, open the rear hatch and locate the fasteners of the light assembly. After removing the retaining…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos