Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Escape
    4. : How to replace the low beam in the Ford Escape

Ford Escape - Video tutorial

Model: Ford Escape MK 3 - Years 2013-2019
Part: Light bulb
Operation: How to replace the low beam in the Ford Escape

We identify the light bulb and then the lighthouse on which we will have to act. We open the engine hood and enter the work area. We remove the dust cover from its seat and then disconnect the power connector. We can now proceed to remove the bulb from its seat; specifically it is a H11. Paying attention we proceed to the installation of the new light bulb. We reconnect the power and close the cap. Now the message indicating the burnt out bulb in the on-board computer will no longer appear and you can continue driving safely.


Posted on 9 October 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Escape 2001-2007 - Why does the Ford Escape turn signal stop working? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos