Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Fog Light Bulb on a Ford Escape

Model: Ford Escape MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fog lights

See other generations:
Video tutorial

Briefly, here are the instructions to remove and replace the front fog light bulb on a Ford Escape. First, move to the front of the vehicle and start by removing the plastic cover of the fog light, prying it off from the sides; then, unscrew the side screws of the fog light assembly, disconnecting the electrical connector of the bulb to remove it, as shown in the video.

At this point, install the new fog light, connecting it and checking its operation; finally, reassemble the fog light assembly and the plastic cover.


Posted on 8 August 2026 by ScegliAuto


Related tutorials

How to Remove the Fog Light from the Ford Escape
How to Remove the Fog Light from the Ford Escape
Ford Escape (2008-2012 / MK 2) In this video tutorial, you will see the steps to remove and replace the fog light on the Ford Escape, following the instructions below. First, remov…
How to replace the fog light bulb of the Ford Escape
How to replace the fog light bulb of the Ford Escape
Ford Escape (2013-2019 / MK 3) To replace the fog light bulbs of the Ford Escape car model produced from 2013 to 2019, we need to use a 7mm wrench to unscrew the clips on the wheel…
How to Replace the Front Fog Lights on a Ford Escape
How to Replace the Front Fog Lights on a Ford Escape
Ford Escape (2001-2007 / MK 1) In this guide, learn how to remove and replace the front fog lights on a Ford Escape. First, lift the vehicle and start by removing the screws locate…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos