Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fog light bulb of the Ford Escape

Model: Ford Escape MK 3 - Years 2013-2019
Part: Fog lights

To replace the fog light bulbs of the Ford Escape car model produced from 2013 to 2019, we need to use a 7mm wrench to unscrew the clips on the wheel arch, in order to remove it and proceed with the bulb replacement. Disconnect the bulb connector and remove it. Insert a new bulb and connect it to the connector. Turn on the vehicle lights to test the bulb before mounting the wheel arch. If the bulb works correctly, mount the wheel arch, otherwise check the operation of another bulb or check the fuse related to the headlight.

Posted on 4 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fog Light from the Ford Escape
How to Remove the Fog Light from the Ford Escape
Ford Escape (2008-2012 / MK 2) In this video tutorial, you will see the steps to remove and replace the fog light on the Ford Escape, following the instructions below. First, remov…
How to Replace the Front Fog Light Bulb on a Ford Escape
How to Replace the Front Fog Light Bulb on a Ford Escape
Ford Escape (2013-2019 / MK 3) Briefly, here are the instructions to remove and replace the front fog light bulb on a Ford Escape. First, move to the front of the vehicle and start…
How to Replace the Headlight Bulb in a Ford Escape
How to Replace the Headlight Bulb in a Ford Escape
Ford Escape (2008-2012 / MK 2) To replace the headlight bulb in a Ford Escape, open the hood to access the back of the headlight corresponding to the bulb to be replaced. Remove th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos