Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Lower Headlight in a Ford Escape?

Model: Ford Escape MK 3 - Years 2013-2019
Part: Headlight

In this tutorial, you will see how to replace the lower front headlight in a Ford Escape, which includes the fog lights, position lights, and turn signal. Before proceeding, ensure that the key is not inserted for safety. Start by prying off the plastic trim along the entire perimeter and unhooking it from the indicated hole, then unscrew the two mounting bolts with a 7mm socket or a Phillips screwdriver. Next, pull the headlight out of the bumper, disconnect the connectors, and replace the damaged element.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight on a Ford Escape?
How to Replace the Rear Headlight on a Ford Escape?
Ford Escape (2008-2012 / MK 2) In this tutorial, you will see how to remove the rear headlight on a Ford Escape, a very simple and quick operation to perform if you need to replace…
Guide to Removing the Front Headlight of a Ford Escape
Guide to Removing the Front Headlight of a Ford Escape
Ford Escape (2013-2019 / MK 3) In this guide, discover the instructions that will allow you to remove and replace the front headlight of a Ford Escape. First, open the hood of the …
How to Replace the Headlight Bulb in a Ford Escape
How to Replace the Headlight Bulb in a Ford Escape
Ford Escape (2008-2012 / MK 2) To replace the headlight bulb in a Ford Escape, open the hood to access the back of the headlight corresponding to the bulb to be replaced. Remove th…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos