Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Headlight on a Ford Escape?

Model: Ford Escape MK 3 - Years 2013-2019
Part: Tail light

In this video, you can see how to remove the rear headlight on a Ford Escape, a very simple and quick operation to perform if you need to replace a bulb or the headlight itself. Start by opening the trunk, then remove the bolt cover caps and unscrew the bolts using a 8mm socket wrench. Once done, grasp the headlight, pull it outward, and disengage the clip from the body. To replace a bulb, simply disconnect the connector and remove the bulb holder by turning it counterclockwise.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Ford Escape 4
How to replace the rear headlight bulb of the Ford Escape 4
Ford Escape (2020-2026 / MK 4) If you own a Ford Escape Mk4 and want to replace the rear headlight bulb yourself, all you need to do is carefully read the following procedure and f…
How to Replace the Lower Headlight in a Ford Escape?
How to Replace the Lower Headlight in a Ford Escape?
Ford Escape (2013-2019 / MK 3) In this tutorial, you will see how to replace the lower front headlight in a Ford Escape, which includes the fog lights, position lights, and turn si…
How to Remove the Headlight from a 2016 Ford Escape
How to Remove the Headlight from a 2016 Ford Escape
Ford Escape (2013-2019 / MK 3) In this video tutorial, you will see how to remove the front headlight from the Ford Escape MK3. To start, lift the hood of the vehicle and locate al…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos