Do it yourself
| ||||
|
Ford Escape - Video tutorial
Model: Ford Escape
MK 1
- Years 2001-2007 Being able to locate the OBD port in your first-generation Ford Escape (year 2005) on your own is really easy, and thanks to the instructions in the following guide, you will have no difficulty. First of all, make sure your Ford Escape is completely turned off, then remain in the driver's seat and shift your attention to the lower part of the dashboard, specifically on the left side. At this point, locate the OBD port you were looking for and connect the diagnostic tool to it using a compatible cable.
Posted on 25 April 2024 by ScegliAuto
Other guides that may interest you |
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.017
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |