Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Ford Escape

Model: Ford Escape MK 3 - Years 2013-2019
Part: Headlight bulb

The following steps will show us how to disassemble and replace the low beam or high beam bulb of the front headlight of the Ford Escape. First, we open the hood of the vehicle and start by removing the plastic cap found behind the headlight; then we disconnect the electrical connector of the bulb to detach and remove it, as shown in the video. At this point, we install the new bulb, of the correct type (in this case, H11); we make the electrical connection and check its operation before reassembling the external protective cap.

Posted on 10 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb in a Ford Escape
How to Replace the Headlight Bulb in a Ford Escape
Ford Escape (2008-2012 / MK 2) To replace the headlight bulb in a Ford Escape, open the hood to access the back of the headlight corresponding to the bulb to be replaced. Remove th…
How to Replace the Headlight Bulb on a 2014 Ford Escape
How to Replace the Headlight Bulb on a 2014 Ford Escape
Ford Escape (2013-2019 / MK 3) If you are wondering how to properly replace the headlight bulb on your 2014 Ford Escape, follow the steps outlined in this guide. First, completely …
How to replace the rear headlight bulb of the Ford Escape 4
How to replace the rear headlight bulb of the Ford Escape 4
Ford Escape (2020-2026 / MK 4) If you own a Ford Escape Mk4 and want to replace the rear headlight bulb yourself, all you need to do is carefully read the following procedure and f…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos