Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb on a Ford Escape

Model: Ford Escape MK 2 - Years: 2008, 2009, 2010, 2011, 2012
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear headlight bulb on a Ford Escape, open the rear hatch and locate the fasteners of the light assembly. After removing the retaining screws, carefully pull the light out from the body, avoiding pulling on the connected wires.

On the back of the light assembly, locate the socket that needs to be removed by twisting it out of its place. Remove the worn bulb and install the new one of the same type and wattage, avoiding touching the bulb with your fingers when specified.

Then, reinsert the socket into the light and reattach the light assembly, tightening the fasteners again. Finally, close the hatch and check the proper functioning of the rear light, brake light, and turn signals.


Posted on 9 August 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlight Bulb on a Ford Escape 4
How to Replace the Rear Headlight Bulb on a Ford Escape 4
Ford Escape (2020-2026 / MK 4) If you own a Ford Escape Mk4 and want to replace the rear headlight bulb yourself, carefully read the following procedure and follow the described st…
How to Remove the Rear Headlight on a Ford Escape?
How to Remove the Rear Headlight on a Ford Escape?
Ford Escape (2013-2019 / MK 3) In this video, you can see how to remove the rear headlight on a Ford Escape, a very simple and quick operation to perform if you need to replace a b…
How to Replace the Headlight Bulb in a Ford Escape
How to Replace the Headlight Bulb in a Ford Escape
Ford Escape (2008-2012 / MK 2) To replace the headlight bulb in a Ford Escape, open the hood to access the back of the headlight corresponding to the bulb to be replaced. Remove th…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos