Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the third brake light on a Ford Escape

Model: Ford Escape MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part:

See other generations:
Video tutorial

Today we will see how to disassemble the third brake light of a third generation Ford Escape. So, to remove the third brake light we need to release the clips that hold it in place, there are three located on the top side (two clips on the sides and one in the center) and three more on the bottom side.

We start the procedure using plastic levers and releasing the three top clips, then we open the trunk and remove the plastic panel behind the third brake light, then we release the three bottom clips as shown in the video. Once we have done this, we can remove the third brake light from its seat, then disconnect the connector and the windshield washer tube, thus finishing the job.


Posted on 4 March 2025 by ScegliAuto


Related tutorials

How to Replace the Tail Light and Third Brake Light on the Ford Escape
How to Replace the Tail Light and Third Brake Light on the Ford Escape
Ford Escape (2013-2019 / MK 3) In this brief guide, you will find instructions to remove and replace the tail light and third brake light on the Ford Escape, as well as the Kuga. F…
How to Replace the Tail Light and Third Brake Light on the Ford Escape
How to Replace the Tail Light and Third Brake Light on the Ford Escape
Ford Escape (2008-2012 / MK 2) In this guide, we will go over the instructions that will allow us to remove and replace the tail light and its bulbs for the Ford Escape. First, let…
How to Replace the Third Brake Light Bulb on the Ford Escape - Kuga
How to Replace the Third Brake Light Bulb on the Ford Escape - Kuga
Ford Escape (2013-2019 / MK 3) Follow these steps to remove and replace the third brake light bulb on the Ford Escape, as well as the Kuga. First, go to the back of the vehicle and…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos