Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Exterior Door Handle of the Ford Escape MK1

Model: Ford Escape MK 1 - Years 2001-2007
Part: Handle

In today's video, you will see the procedure necessary to remove and replace the exterior door handle of the first generation Ford Escape. First, open the front door and start by removing the door panel; to do this, remove the mirror cover and unscrew all the screws on the panel, also removing the side switch panel and disconnecting the various electrical connectors, as shown in the video. At this point, remove the inner trim and unscrew the handle mounting screws; first, pull out the small piece, then replace the inner handle!

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Door Lock Actuator on the Ford Escape
Replacing the Front Door Lock Actuator on the Ford Escape
Ford Escape (2001-2007 / MK 1) The instructions in this guide will show you the procedure for removing and replacing the lock actuator on the Ford Escape. First, open the front doo…
How to replace the exterior door handle of the Ford Escape
How to replace the exterior door handle of the Ford Escape
Ford Escape (2013-2019 / MK 3) Today's information will allow us to dismantle and replace the external handle of the front door of the Ford Escape, in simple and quick steps. First…
Removing the Rear Hatch Panel of the Ford Escape
Removing the Rear Hatch Panel of the Ford Escape
Ford Escape (2008-2012 / MK 2) In today's tutorial video, you will learn how to remove and replace the rear hatch panel of the Ford Escape in simple and quick steps. First, open th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos